Hello everyone!
I'm interested in bare metal programming my Rpi 3b+. I already have an Rpi Debug Probe (from a different project and target board) and was wondering if there's a way to connect the Debug Probe to the 3b+ and control the 3b+ using OpenOCD and SWP?
I'm guessing doing something like this would require creating my own cable between the "D" port on the Debug Probe with whatever is necessary on the 3b+ (the GPIO pins, I guess?).
Please forgive the n00b questions--I'm using the Rpi as a learning tool to venture into the hardware space, where I have next to zero experience![:P]( "Razz")
If this isn't easily do-able, then would I be better off buying something like the FT2232H (as seen here: https://www.vinnie.work/blog/2021-04-02-ft2232h-rpi4/)?
What do you recommend?
I'm interested in bare metal programming my Rpi 3b+. I already have an Rpi Debug Probe (from a different project and target board) and was wondering if there's a way to connect the Debug Probe to the 3b+ and control the 3b+ using OpenOCD and SWP?
I'm guessing doing something like this would require creating my own cable between the "D" port on the Debug Probe with whatever is necessary on the 3b+ (the GPIO pins, I guess?).
Please forgive the n00b questions--I'm using the Rpi as a learning tool to venture into the hardware space, where I have next to zero experience
If this isn't easily do-able, then would I be better off buying something like the FT2232H (as seen here: https://www.vinnie.work/blog/2021-04-02-ft2232h-rpi4/)?
What do you recommend?
Statistics: Posted by floridoug — Sun Aug 25, 2024 11:18 pm