since i got the official Raspberry pihat M2 i'm running into this problem when i restart the Raspberry from gui or terminal most of the time the fan remains active and an error that i attach in photo. just turn off the power and turn it back on to have the system started and working again. what could it be?
Could it be the fact that I have PCIe 3 enabled? I replaced two SSDs with the same problem
the strange thing is that sometimes it restarts normally, other times after the reboot it freezes with the screen I attached
can you be the fact that you have enabled pci 3.0? why does it work if I turn off the power and start it again?
I only get the problem with the reboot command from the gui or terminal
Could it be the fact that I have PCIe 3 enabled? I replaced two SSDs with the same problem
the strange thing is that sometimes it restarts normally, other times after the reboot it freezes with the screen I attached
can you be the fact that you have enabled pci 3.0? why does it work if I turn off the power and start it again?
I only get the problem with the reboot command from the gui or terminal
Statistics: Posted by tigernero — Thu Nov 14, 2024 5:34 pm