Networking and servers • Re: Apache SSL with public IP

Code:

[b][Sat Feb 01 21:15:05.147029 2025] [ssl:warn] [pid 8046:tid 8046] AH01909: prout.fr:443:0 server certificate does NOT include an ID which matches the server n[/b]>

Code:

sudo openssl verify /etc/ssl/certs/apache.crt

Code:

C = FR, ST = france, L = La Rochelle, O = comp, OU = sec, CN = 93.11.66.173, emailAddress = dkjfh@sdfs.frerror 18 at 0 depth lookup: self signed certificateerror /etc/ssl/certs/apache.crt: verification failed

Code:

# If you just change the port or add more ports here, you will likely also# have to change the VirtualHost statement in# /etc/apache2/sites-enabled/000-default.confListen 80<IfModule ssl_module>Listen 443</IfModule><IfModule mod_gnutls.c>Listen 443</IfModule># vim: syntax=apache ts=4 sw=4 sts=4 sr noet

Code:

127.0.0.1localhost::1localhost ip6-localhost ip6-loopbackff02::1ip6-allnodesff02::2ip6-allrouters127.0.0.1RASP-SRVR

Code:

# This is the main Apache server configuration file.  It contains the# configuration directives that give the server its instructions.# See http://httpd.apache.org/docs/2.4/ for detailed information about# the directives and /usr/share/doc/apache2/README.Debian about Debian specific# hints.### Summary of how the Apache 2 configuration works in Debian:# The Apache 2 web server configuration in Debian is quite different to# upstream's suggested way to configure the web server. This is because Debian's# default Apache2 installation attempts to make adding and removing modules,# virtual hosts, and extra configuration directives as flexible as possible, in# order to make automating the changes and administering the server as easy as# possible.# It is split into several files forming the configuration hierarchy outlined# below, all located in the /etc/apache2/ directory:##/etc/apache2/#|-- apache2.conf#|`--  ports.conf#|-- mods-enabled#||-- *.load#|`-- *.conf#|-- conf-enabled#|`-- *.conf# `-- sites-enabled# `-- *.conf### * apache2.conf is the main configuration file (this file). It puts the pieces#   together by including all remaining configuration files when starting up the#   web server.## * ports.conf is always included from the main configuration file. It is#   supposed to determine listening ports for incoming connections which can be#   customized anytime.## * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/#   directories contain particular configuration snippets which manage modules,#   global configuration fragments, or virtual host configurations,#   respectively.##   They are activated by symlinking available configuration files from their#   respective *-available/ counterparts. These should be managed by using our#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See#   their respective man pages for detailed information.## * The binary is called apache2. Due to the use of environment variables, in#   the default configuration, apache2 needs to be started/stopped with#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not#   work with the default configuration.# Global configuration### ServerRoot: The top of the directory tree under which the server's# configuration, error, and log files are kept.## NOTE!  If you intend to place this on an NFS (or otherwise network)# mounted filesystem then please read the Mutex documentation (available# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);# you will save yourself a lot of trouble.## Do NOT add a slash at the end of the directory path.##ServerRoot "/etc/apache2"## The accept serialization lock file MUST BE STORED ON A LOCAL DISK.##Mutex file:${APACHE_LOCK_DIR} default## The directory where shm and other runtime files will be stored.#DefaultRuntimeDir ${APACHE_RUN_DIR}## PidFile: The file in which the server should record its process# identification number when it starts.# This needs to be set in /etc/apache2/envvars#PidFile ${APACHE_PID_FILE}## Timeout: The number of seconds before receives and sends time out.#Timeout 300## KeepAlive: Whether or not to allow persistent connections (more than# one request per connection). Set to "Off" to deactivate.#KeepAlive On## MaxKeepAliveRequests: The maximum number of requests to allow# during a persistent connection. Set to 0 to allow an unlimited amount.# We recommend you leave this number high, for maximum performance.#MaxKeepAliveRequests 100## KeepAliveTimeout: Number of seconds to wait for the next request from the# same client on the same connection.#KeepAliveTimeout 5# These need to be set in /etc/apache2/envvarsUser ${APACHE_RUN_USER}Group ${APACHE_RUN_GROUP}## HostnameLookups: Log the names of clients or just their IP addresses# e.g., www.apache.org (on) or 204.62.129.132 (off).# The default is off because it'd be overall better for the net if people# had to knowingly turn this feature on, since enabling it means that# each client request will result in AT LEAST one lookup request to the# nameserver.#HostnameLookups Off# ErrorLog: The location of the error log file.# If you do not specify an ErrorLog directive within a <VirtualHost># container, error messages relating to that virtual host will be# logged here.  If you *do* define an error logfile for a <VirtualHost># container, that host's errors will be logged there and not here.#ErrorLog ${APACHE_LOG_DIR}/error.log## LogLevel: Control the severity of messages logged to the error_log.# Available values: trace8, ..., trace1, debug, info, notice, warn,# error, crit, alert, emerg.# It is also possible to configure the log level for particular modules, e.g.# "LogLevel info ssl:warn"#LogLevel warn# Include module configuration:IncludeOptional mods-enabled/*.loadIncludeOptional mods-enabled/*.conf# Include list of ports to listen onInclude ports.conf# Sets the default security model of the Apache2 HTTPD server. It does# not allow access to the root filesystem outside of /usr/share and /var/www.# The former is used by web applications packaged in Debian,# the latter may be used for local directories served by the web server. If# your system is serving content from a sub-directory in /srv you must allow# access here, or in any related virtual host.<Directory />Options FollowSymLinksAllowOverride NoneRequire all denied</Directory><Directory /usr/share>AllowOverride NoneRequire all granted</Directory>ServerName 93.11.66.173<Directory /var/www/html>Options Indexes FollowSymLinksAllowOverride AllRequire all granted</Directory>#<Directory /srv/>#Options Indexes FollowSymLinks#AllowOverride None#Require all granted#</Directory># AccessFileName: The name of the file to look for in each directory# for additional configuration directives.  See also the AllowOverride# directive.#AccessFileName .htaccess## The following lines prevent .htaccess and .htpasswd files from being# viewed by Web clients.#<FilesMatch "^\.ht">Require all denied</FilesMatch>## The following directives define some format nicknames for use with# a CustomLog directive.## These deviate from the Common Log Format definitions in that they use %O# (the actual bytes sent including headers) instead of %b (the size of the# requested file), because the latter makes it impossible to detect partial# requests.## Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.# Use mod_remoteip instead.#LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combinedLogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combinedLogFormat "%h %l %u %t \"%r\" %>s %O" commonLogFormat "%{Referer}i -> %U" refererLogFormat "%{User-agent}i" agent# Include of directories ignores editors' and dpkg's backup files,# see README.Debian for details.# Include generic snippets of statementsIncludeOptional conf-enabled/*.conf# Include the virtual host configurations:IncludeOptional sites-enabled/*.conf# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

Code:

<VirtualHost *:80>     ServerName  93.11.66.173     ServerAlias www.93.11.66.173     ServerAdmin webmaster@localhost     DocumentRoot /var/www/html     ErrorLog ${APACHE_LOG_DIR}/error.log     CustomLog ${APACHE_LOG_DIR}/access.log combined #   Redirect "/" "https://192.168.1.76/"</VirtualHost><VirtualHost *:443># The ServerName directive sets the request scheme, hostname and port that# the server uses to identify itself. This is used when creating# redirection URLs. In the context of virtual hosts, the ServerName# specifies what hostname must appear in the request's Host: header to# match this virtual host. For the default virtual host (this file) this# value is not decisive as it is used as a last resort host regardless.# However, you must set it for any further virtual host explicitly.#ServerName www.example.comServerAdmin webmaster@localhostDocumentRoot /var/www/html# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,# error, crit, alert, emerg.# It is also possible to configure the loglevel for particular# modules, e.g.#LogLevel info ssl:warnErrorLog ${APACHE_LOG_DIR}/error.logCustomLog ${APACHE_LOG_DIR}/access.log combined# For most configuration files from conf-available/, which are# enabled or disabled at a global level, it is possible to# include a line for only one particular virtual host. For example the# following line enables the CGI configuration for this host only# after it has been globally disabled with "a2disconf".#Include conf-available/serve-cgi-bin.confServerName 93.11.66.173        SSLEngine on        SSLProtocol all -SSLv2        SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5        SSLCertificateFile "/etc/ssl/certs/apache.crt"        SSLCertificateKeyFile "/etc/ssl/private/apache.key"</VirtualHost># vim: syntax=apache ts=4 sw=4 sts=4 sr noet