Hi,
This is not an issue, just something I am curious to understand better.
I have just installed a brand new NVME SSD into my new Argon Neo 5 case using the PCIe connector. Still booting from an SD card and with a fresh install of PiOS I can see the NVME drive is recognized and shows up in GParted as /dev/nvme0n1 ready to be partitioned. I have not made any changes to the config.txt file, there is certainly no dtparam=pciex1 line added. Why is this working?![:shock:]( "Shocked")
My understanding is (and according to the official documentation) dtparam=pciex1 is required to activate the PCIe connector on the RPi5?
Thanks in advance.
This is not an issue, just something I am curious to understand better.
I have just installed a brand new NVME SSD into my new Argon Neo 5 case using the PCIe connector. Still booting from an SD card and with a fresh install of PiOS I can see the NVME drive is recognized and shows up in GParted as /dev/nvme0n1 ready to be partitioned. I have not made any changes to the config.txt file, there is certainly no dtparam=pciex1 line added. Why is this working?
My understanding is (and according to the official documentation) dtparam=pciex1 is required to activate the PCIe connector on the RPi5?Thanks in advance.
Statistics: Posted by piggoy — Wed Feb 28, 2024 4:25 pm