Connect the Display in Mode6 - https://www.raspberrypi.com/documentati ... erface-dpi
will allow you to have 2 PWM on GPIO18/19 and a SW I2C on GPIO10/11.
If you need HW I2C on GPIO10/11 you will have to use > Pi4.
A CM4 based approach might be an Option.
will allow you to have 2 PWM on GPIO18/19 and a SW I2C on GPIO10/11.
If you need HW I2C on GPIO10/11 you will have to use > Pi4.
A CM4 based approach might be an Option.
Statistics: Posted by aBUGSworstnightmare — Tue May 06, 2025 4:27 am