Troubleshooting • Re: RPi 4 NVME over Network transfer speed issue

Code:

[596737.590082] usb 2-2: USB disconnect, device number 50[596737.642091] sd 0:0:0:0: [sda] Synchronizing SCSI cache[596737.881967] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=DRIVER_OK[596742.274759] usb 2-2: new SuperSpeed USB device number 51 using xhci_hcd[596742.306400] usb 2-2: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01[596742.306413] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3[596742.306419] usb 2-2: Product: Ugreen Storage Device[596742.306424] usb 2-2: Manufacturer: Ugreen[596742.306428] usb 2-2: SerialNumber: 0129380515DA[596742.334186] usb 2-2: Enable of device-initiated U1 failed.[596742.335031] usb 2-2: Enable of device-initiated U2 failed.[596742.364524] usb 2-2: Enable of device-initiated U1 failed.[596742.365398] usb 2-2: Enable of device-initiated U2 failed.[596742.368905] scsi host0: uas[596742.932634] scsi 0:0:0:0: Direct-Access     CT2000P3 SSD8             1.00 PQ: 0 ANSI: 6[596742.951414] sd 0:0:0:0: Attached scsi generic sg0 type 0[596742.955416] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)[596742.956742] sd 0:0:0:0: [sda] Write Protect is off[596742.956765] sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08[596742.959314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[596742.960659] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes[596742.960684] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes[596742.973471]  sda: sda1 sda2[596742.974590] sd 0:0:0:0: [sda] Attached SCSI disk