On a pico2w running MicroPython 1.27, with an attached BMP280 at 0x76, I used the bmp280.py lib from GitHub https://github.com/dafvid/micropython-b ... ree/master
That gave
18.8
102716.416
The pins used were
That gave
18.8
102716.416
The pins used were
Code:
pico pin function bmp280 6 GP4 I2C0 SDA Yellow -> SDA bmp280 7 GP5 I2C0 SCL Blue -> SCL bmp28023 GND Black -> GND bmp28036 3V3 OUT Red -> VCC bmp280Also bmp280 VCC Red -> CSB bmp280 (red link wire)Statistics: Posted by neilgl — Tue Dec 30, 2025 5:33 pm