Raspberry Pi OS • Re: Bookworm/Trixie Spurious App Input - WayVNC Problem?
A member of the WayVNC group suggested I try TigerVNC Viewer instead. Indeed, I don't see this issue with TigerVNC.Of course, it raises the question of why TigerVNC works for me but RealVNC and...
View ArticleTroubleshooting • Re: Raspberry pi red and green light always solid
1) what are you using for a power supply?2) did you create the SD card with PI-imager?3) what version of PI-OS did you load on the SD Card?if you remove the SD Card, and power up, do you get the...
View ArticleCamera board • Re: Pi4 and camera module not being recognised by Libacamera
With Trixie the camera is automatically recognised - no need to enable it.What does this show Code: rpicam-hello --listStatistics: Posted by neilgl — Mon Jan 19, 2026 7:39 pm
View ArticleTroubleshooting • Re: Unable to access pi after install
So either raspberry pi's are complete garbage and don't work, pi installations don't work on windows 11, or I got bad components. Welcome, new user!There is a fourth possible reason you perhaps...
View ArticleRaspberry Pi OS • Re: Upgrade still possible ?
Any advice of what's a good way to list all the stuff that's been installed over the years?As said by 'bjtheone' there have been a number of discussions on this over the years. There is no single...
View ArticleGeneral discussion • Re: What product would you like to see?
(Wow, CMedia is a blast from the past).They are still going, but have gone all USB-ish, which I suppose is where the volume is nowadays.Does it go up to 11?Statistics: Posted by ame — Mon Jan 19, 2026...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: RP1 PIO issues with FIFO or DMA...
Unfortunately, moving pio_sm_set_enable after pio_sm_config_xfer, and adding a 1ms delay before calling enable does not fix the issue.Statistics: Posted by astuder — Mon Jan 19, 2026 7:54 pm
View ArticleGeneral discussion • Needing help with an old kit
Hello Folks,I recently purchase a n OU kit for "My Digital Life TU100" - from eBay; yes Ishould have known better than do this.The kit has a board "Sense Board version 3" and a stepper motor MY351-1...
View ArticleTroubleshooting • Re: jwz's flappy gpio problems
The GPIO inputs are just switches, but there is also an SPI display involved.I would suggest starting from a foundation others can replicate, removing that SPI display. In fact just having the GPIO...
View ArticleTroubleshooting • Re: RPI5 won't boot
I get this:joni8135@raspberrypi:~ $ grep Rev /proc/cpuinfoRevision : d04171Model : Raspberry Pi 5 Model B Rev 1.1Nothing strange there.Yes, that is the correct Revision of an 8GB Pi, so it looks like...
View ArticleKeyboard computers (400, 500, 500+) • Re: Pi 500plus keyboard issue.
Thanks ejolson,That response was very helpful, and the link to the earlier thread also linked to another similar case. Both of which seemed to suggest a hardware issue.I will get in touch with the...
View ArticleMicroPython • Waveshare 2 inch display not working with Pico
HiI am trying to get the Waveshare 2" LCD, the standard display not the pico board mount, working with my pico. When I run the code, excerpt below, all the debug messages are printed but the display...
View ArticleGeneral • Re: Unable to debug my Pico 2 W using debug probe
Thanks for the reply.I'm supplying power to the board via the USB interface on the Pico. Also, I cannot set a breakpoint just after the main() routine starts, as it resets before it gets into...
View ArticleBeginners • Re: Yet someone else that cannot SSH
Since deleting the host file on my windows PC I can ssh and signin either way. Is there any harm just using user@host IP? Seems more simple.Probably not but if you reflash the SD card again expect the...
View ArticleTroubleshooting • Sudo apt update
Hi, I can't install pi-apps. Because Sudo apt update fails. Any help to solve it? .***. Monday, 19 January 2026, 22:34:49 ***** Linux 5.10.103-v7l+ armv7l GNU/Linux `***' |*| Filesystem Size Used...
View ArticleHATs and other add-ons • Re: hat for sandisc X400 SATA Drives
Thanks will have a look at the radxa stuff.Already decided to use one as a portable drive, the others might go in a pi or elsewhere. Already thinking it's easier to just buy a hat with an nvme, but...
View ArticleGeneral • Re: How to debug Pico 2 with SEGGER Ozone?
Not many Ozone users here. Best to ask on https://forum.segger.com/board/14-ozone-related/Statistics: Posted by trejan — Tue Jan 20, 2026 8:16 pm
View ArticleHATs and other add-ons • Re: Hailo AI Hat+2 and NVMe SSD HAT
It suspicious, that during the tryin' I've killed my NVMe SSD.Also, to give extra juice from GPIO is also risky, cause for installing the AI HAT a GPIO pin riser should be inserted between the Pi and...
View ArticleNederlands • Stremio installatie
Welke tutorial kan ik het best gebruiken voor stremio te installeren op mijn raspberry pi 5 met besturingssysteem Raspbian GNU/LinuxStatistics: Posted by larrgoo — Tue Jan 20, 2026 8:44 pm
View ArticleCamera board • Re: Request support for simultaneous operation of two cameras...
Thank you for your quick and extremely helpful reply!You are absolutely right — the problem really was the use of DRM rendering, which allows only one "wizard". As soon as we switched to windowed mode...
View Article