Working R-Pi 5 with bookworm/wayland, connecting remotely with TigerVNC.
Searching the web throws up a few issues using NVME but I didn't find an answer to my problem
Trying to setup boot from NVME with a brand new out of the box M.2 HAT+ following instructions from https://www.raspberrypi.com/documentati ... -plus.html and https://www.raspberrypi.com/documentati ... e-ssd-boot
I have updated the image, firmware and bootloader as instructed.
I can see the driveWhen I run rpi-image the drive is not available as a target for writing an image.
Searching suggested adding dtparam=nvme to config.txt but that made no difference.
Can anyone help?
Searching the web throws up a few issues using NVME but I didn't find an answer to my problem
Trying to setup boot from NVME with a brand new out of the box M.2 HAT+ following instructions from https://www.raspberrypi.com/documentati ... -plus.html and https://www.raspberrypi.com/documentati ... e-ssd-boot
I have updated the image, firmware and bootloader as instructed.
I can see the drive
Code:
$ ls -l /dev/nvme*crw------- 1 root root 245, 0 Mar 5 15:24 /dev/nvme0brw-rw---- 1 root disk 259, 0 Mar 5 15:24 /dev/nvme0n1Searching suggested adding dtparam=nvme to config.txt but that made no difference.
Can anyone help?
Statistics: Posted by crosland — Wed Mar 05, 2025 3:33 pm