Compute Module • Re: Ethernet without POE in RPi CM4
CM4 is not a LAN7500. I can only comment on CM4.Statistics: Posted by dp11 — Tue Jun 24, 2025 11:54 am
View ArticleHATs and other add-ons • Re: Raspberry Pi 5 + PoE HAT?
We can hope...Statistics: Posted by dickon — Tue Jun 24, 2025 11:54 am
View ArticleTroubleshooting • Re: Raspberry Pi 3a/Bookworm + Lo-tech VGA HAT woes
Thanks for your reply. I ended up getting it to work the other day with this config:Code: #SVGA...
View ArticleTroubleshooting • Re: argon neo 5 NVMe not detected
I mean am I able to start the fan up without plugging it into the fan port, am I able to shove the JST connector to the GPIOStatistics: Posted by Minecraftplayer2937 — Tue Jun 24, 2025 12:11 pm
View ArticleOther • Re: What should I know about before using UEFI firmware?
The OS you run, Fedora Rawhide or Opensuse Tumbleweed or 'pacman Linux' or Debian Testing (rolling releases) should include almost all drivers you also find in the downstream kernel, but not things...
View ArticleTroubleshooting • Re: IR Reciver worked on Buster install not working on...
Hi,"Happy" to see someone has the same issue.As said IrScrutinizer was working with Buster on my Rpi2 but not working with Bookworm on my Rpi3.So, I installed evtest.Code: evtestNo device specified,...
View ArticleCompute Module • Reset RPi CM4
I am wondering how we can add a push button on the custom new design PCB to reset RPi CM4. In the documentation I found the following statement. "RUN_PG: This pin when high signals that the CM4 has...
View ArticleClik here to view.
Advanced users • HDMI wireless possible with Pi5 desktop?
Hello,I would like to reduce cables and add wireless HDMI.This might preempt the Pi5 desktop's micro HDMI port failing, as it freezes the Pi5 desktop if I gently bump it.I'm curious on compatibility...
View ArticleClik here to view.
Advanced users • Re: HDMI wireless possible with Pi5 desktop?
...maybe these ones30m Wireless Transmission Video Transmitter and Receiver HDMI Extender Display Adapter Cable Screen Mirror for Camera PC To TVor1080P 50m Type C / HDMI Wireless Extender Video...
View ArticleCompute Module • Re: Reset RPi CM4
Global Enable might be better because it resets the power supply.Pull low to resetStatistics: Posted by timg236 — Tue Jun 24, 2025 1:09 pm
View ArticleFor sale • Re: Raspberry Pi good for sale
Thank you, unfortunately it won’t let me upload photos so the best thing to do would probably be to emailChekkocarpenter@gmail.com so I can try and explain what we have in more detail/share photos...
View ArticleGraphics, sound and multimedia • Re: Negative VGA voltage. How is this possible?
TTL is 0V and 5V signalling (with tolerances).Most Pi VGA HATS will be driving the sync signals from the 3.3V GPIOs, so are a bit low for TTL compatibility. 5-1.5 = 3.5V, so 3.3V is technically too...
View ArticleSDK • USB and CYW43 Wi-Fi both dead after waking from hello_sleep on RP2350 –...
Hi all,I’m working with a Raspberry Pi Pico 2W (RP2350) and trying to use the “hello_sleep” example ( using pico-extras, linked on datasheet) to put the device into SLEEP mode via the AON timer, then...
View ArticleCompute Module • Re: USB connector to program eMMC flash
Yes that's true. I even don't need multiplexer FSUSB42MUX. Now I am wondering about USB_OTG_ID (101) of CM4. I think I need to leave it unconnected because I am only using CM4 in USB device mode with...
View ArticleDevice Tree • Re: Using an overlay to send a clock signal to a GPIO pin.
Here's what I tried based on your instructions, this doesn't configure the GPIO nor get a clock signal through :/Code: /dts-v1/;/plugin/;/ { compatible = "brcm,bcm2712"; fragment@0 { target-path =...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Is this the way to wire a Rpi3 to a...
My 2ct advice: compile your overlays in tree!Code: panel: panel@0 {compatible = "panel", "panel-mipi-dbi-spi";reg = <0>;spi-max-frequency = <32000000>;width-mm = <0>;height-mm =...
View ArticleAdvanced users • Re: Newbie questions regarding Chrony
Hi bls...pihole.toml config file has this entry:Code: server = "" ### CHANGED, default = "pool.ntp.org"Does this need changing to the localhost IP since chrony runs on it?You definitely should point...
View ArticleAdvanced users • Microsoft Edit CLI editor, preinstalled alongside nano?
Goodbye Vim? Say Hello to Microsoft's New Text Editor Written in Rust!https://www.youtube.com/watch?v=75cMN80IUBMIt's Open Source. The video covers building Edit on Raspberry Pi.Can Edit come...
View ArticleGeneral discussion • Re: Does it make sense to make a laptop with Raspberry...
no suspend but if that's not a problem and it's not outrageously expensive I'd probably get oneStatistics: Posted by wcl55 — Wed Jun 25, 2025 1:11 pm
View ArticleTroubleshooting • Re: Help - Waveshare 2.9 inch flexible and Pi5
Did you use a python virtual environment (venv) to install the python spidev library?The instructions on the waveshare wiki say Code: sudo pip3 install spidev but that won't work.Maybe create a venv...
View Article